| 卫生间表面渗水判断 |
| 添加时间：2019/8/26 15:30:32 浏览次数： |
| 卫生间表面渗水其实也就是防水层渗漏了，可能是卫生间装修的时候防水层没做好，也有可能是防水层在后期使用被破坏掉了。但无论哪种情况，首先要确实的是否是表面渗水。这里有3个小方法，可以判断：（1）洗澡或者拖地的时候，观察卫生间地面，看是否在地面和墙面之间有积水或者渗水，如果有，那么就是利用确定是卫生间的表面渗水了。（2）如果卫生间的防水层渗水发生在墙面和地面之间，一般而言在墙面的位置会出现发霉等情况。（3）检查其他地方有没有渗水的情况，卫生间的管道是否是完好的，如果是，那也可以用排除法确实是卫生间地面渗水了。 In fact, the water leakage on the surface of the toilet is the leakage of the waterproof layer. It may be that the waterproof layer was not well done when the toilet was decorated, or that the waterproof layer was destroyed in the later use. But in either case, the first thing to be sure is whether the surface is seepage or not. Here are three ways to judge: (1) When bathing or mopping the floor, observe the floor of the toilet to see if there is water or seepage between the floor and the wall. If there is, then use the surface of the toilet to determine that it is seepage. (2) If the water-proof layer of the toilet seepage occurs between the wall and the floor, generally speaking, there will be mildew in the position of the wall. (3) Check whether there is seepage in other places, whether the toilet pipeline is perfect, and if so, it can also be used to exclude the ground seepage of the toilet. |
| 上一页 防水种类?? |
| 下一页 家装防水 |
Copyright © 技术支持：遨游网络