卫生间防水补漏方法一
Waterproofing and Leakage Repair Method for Toilet
如果是因为防水层漏水导致的，那可以将原来的瓷砖去掉，做基膜清洁。水泥砂浆配比之后将地面做平整，再做防水处理，对于防水处理墙面高度可以控制在30cm左右，墙面做防水后更好的防止卫生间漏水。
If it is caused by the leakage of the waterproof layer, the original tile can be removed and the basement membrane can be cleaned. After mixing cement mortar, the ground is leveled and waterproofed. For waterproofing treatment, the height of the wall can be controlled at about 30 cm. After waterproofing, the wall can better prevent the toilet from leaking.
卫生间防水补漏方法二
Waterproofing and Leakage Repair Method for Toilet II
如果是卫生间下水管出现问题，可以先找到漏水的具体位置，然后根据情况进行刨瓷砖解决，再更换新的水管。
If there is a problem with the sewer pipe in the toilet, you can find the specific location of the leakage first, and then plan the tile to solve the problem according to the situation, and then replace the new water pipe.
卫生间防水补漏方法三
Waterproofing and Leakage Repair Method for Toilet
由于卫生间比较潮湿，在进行卫生间漏水维修时，可以考虑将吊顶换成防水性好的PVC扣板，安装在龙骨上遮蔽管道。
Because the bathroom is relatively humid, in the bathroom leakage repair, you can consider replacing the ceiling with a good waterproof PVC fastener, installed on the keel to shield the pipeline.
卫生间防水补漏方法四
Waterproofing and Leakage Repair Method for Toilet IV
对于地面水管漏水，要先将地砖刨开，找到漏水的水管，进行更加新的水管或密封处理。
For the leakage of ground water pipes, we should first dig out the floor tiles, find the leaking water pipes, and carry out more new water pipes or sealing treatment.